Full-Service Hydraulic Repair Facility🇺🇸
Heavy Equipment Repairs & Rebuilds Done Right
A full-service machine shop with decades of hands-on experience restoring hydraulic breakers, cylinders, and aircraft jacks to factory specifications. Fast turnaround. Warranty-backed.
30+
Years Experience
24/7
Emergency Service
All
Makes & Models
Hydraulic Breakers & Hammers
Complete Breaker Repair, Rebuilds & Parts
Hydraulic hammers take a beating on every job — and eventually that punishment catches up. Whether your breaker is losing striking power, leaking fluid, burning through nitrogen, or has suffered internal damage, our team has the expertise to bring it back to full working order. We handle everything from targeted seal replacements and piston reconditioning to complete certified rebuilds where every component is disassembled, measured against factory tolerances, machined or replaced as needed, and reassembled with new seals throughout.
What We Handle
- Certified full rebuilds with warranty
- Piston, bushing & tool holder repairs
- Cylinder bore reconditioning
- Nitrogen recharging & pressure testing
- Seal kit replacements
- Chuck housing restoration
- Pedestal-mounted rockbreaker boom servicing
Parts Inventory
We stock an extensive range of breaker components spanning decades of production — pistons, bushings, thrust rings, tie rods, side bolts, retainer pins, seal kits, diaphragms, and chuck housings. If a part has been discontinued by the manufacturer, our machine shop can fabricate a replacement from engineering prints or reverse-engineer it from your existing component.
Brands We Work On
Don't see your brand listed? We work on virtually every make and model — get in touch.
Hydraulic Cylinders
Cylinder Repair, Remanufacturing & Custom Builds
Our hydraulic cylinder specialists bring years of precision machining and repair experience to every job. Whether you need a straightforward seal replacement on a standard excavator cylinder or a full remanufacture of an obsolete unit that's no longer in production, we have the tooling and know-how to deliver. We also design and build custom cylinders from scratch when off-the-shelf solutions won't cut it.
Our Cylinder Capabilities
- Complete teardown and rebuild to OEM specs
- Rod and bore re-chroming and plating
- Precision honing (horizontal & vertical)
- Seal and gland replacement
- Custom cylinder design and fabrication
- Obsolete cylinder remanufacturing
- Welding and structural repair
Brands We Service
Every repaired or remanufactured cylinder undergoes rigorous pressure testing and leak checks before it leaves our facility. We don't cut corners — your equipment goes back into service ready to perform.
Aircraft Jacks
Aircraft Jack Repair & Recertification for All Makes
Aircraft jacks are safety-critical ground support equipment — there's zero room for error. Our technicians are trained to repair, rebuild, and recertify hydraulic aircraft jacks across all major manufacturers. From tripod jacks and wing jacks to axle jacks and tail stands, we service the full range of ground support hydraulic equipment used in commercial and military aviation maintenance.
What We Provide
- Full jack overhaul and recertification
- Hydraulic ram and cylinder rebuild
- Seal replacement and pressure testing
- Load testing and safety validation
- Structural inspection and weld repair
- Ground support equipment servicing
Manufacturers We Work With
We service all makes and models of aircraft jacks — including legacy and discontinued units.
Every jack that leaves our shop has been tested under load, inspected for structural integrity, and documented with full service records. Your maintenance team can put it back into rotation with complete confidence.
What We Repair
If It's Hydraulic, We Can Fix It
Beyond our three core specialties, our shop handles a wide range of hydraulic and mechanical repair work. Our facility is equipped with CNC machining centers, precision grinding equipment, honing machines, and chrome plating capabilities — giving us the capacity to tackle jobs that other shops can't or won't take on.
Hydraulic Pumps & Motors
We rebuild and repair hydraulic pumps and drive motors across all major brands. From gear pumps to piston motors, we restore units to factory performance.
Gearbox Repair & Gear Cutting
Our team works on an extensive range of industrial gearboxes — reducers, speed increasers, right-angle drives, and planetary systems. We handle everything from bearing replacements to complete gear set overhauls, plus custom gear cutting in-house when OEM parts are unavailable.
Concrete Crushers & Pulverizers
We service hydraulic concrete crushers, rotating and static pulverizers, and demolition shears. Jaw rebuilds, cylinder repairs, and pivot reconditioning are all within our scope.
Hydraulic Hammers
Full-service repair and rebuilds on hydraulic hammers and rock breakers — piston honing, impact ring replacements, seal kits, tie-rod inspection, and gas charge restoration. We work on all major brands across construction, demolition, and quarry applications.
Chrome Plating & Surface Finishing
We offer both hard chrome plating and electroless nickel plating for hydraulic rods, cylinder bores, and other wear surfaces. Restoring surface finish is critical to seal life and equipment longevity.
Welding & Structural Repairs
Our certified welders handle structural crack repair, overlay welding, and fabrication work on heavy equipment frames, boom arms, and hydraulic housings.
Not sure if we can handle your job? Give us a call — chances are we've seen it before.
About Us
Family-Owned. Decades of Expertise. Built on Trust.
We're a family-owned and operated machine shop and repair facility that has been serving the construction, demolition, aviation, and industrial sectors for over two decades. What started as a small hydraulic repair operation has grown into a full-service facility equipped to handle everything from precision aircraft jack recertification to heavy-duty breaker overhauls.
Our approach is simple: do the job right, price it fairly, and stand behind the work. Every piece of equipment that comes through our doors gets the same level of attention — whether it's a routine seal swap or a ground-up rebuild on a unit that another shop turned away. We stock a deep inventory of parts, maintain modern machining equipment, and employ technicians who genuinely understand the machinery they're working on.
Our shop never closes. Whether it's a scheduled rebuild or a middle-of-the-night emergency, we're here when you need us.
20+
Years in Business
24/7
Emergency Service
USA
Nationwide Coverage
100%
Warranty on All Rebuilds
Why Choose Us
What Sets Us Apart
Around-the-Clock Availability
We operate 24/7 with emergency service for critical breakdowns. Downtime is expensive — we move fast so you don't have to wait.
Warranty-Backed Workmanship
Every certified rebuild and major repair ships with warranty protection. We stand behind our work because we're confident in the standards we maintain.
Cost-Effective Alternatives
A professional rebuild typically runs 50–70% less than buying new equipment. We provide detailed estimates upfront with no hidden charges.
All Makes, All Models
From current production equipment to legacy units that have been out of production for decades — if it's hydraulic, we can work on it.
Our Process
From Intake to Delivery — How Every Job Works
Initial Assessment
Describe the issue or ship us the unit. We provide a free estimate and follow up with a detailed written quote.
Disassembly & Inspection
Every component is removed, cleaned, measured, and checked against manufacturer specifications.
Inspection Report
You receive a documented report covering all findings, failure points, and our recommended scope of work — with photos where applicable.
Machining & Rebuilding
Worn or damaged parts are machined, plated, or replaced. New seals and o-rings are fitted. Everything is brought back to spec.
Testing & QC
The reassembled unit undergoes pressure testing, leak checks, load testing (for jacks), and functional validation.
Delivery
Your equipment ships back refinished, tested, and ready for service — complete with warranty documentation and service records.
What Our Clients Say
Trusted by Professionals
“Dependable and quick — they got our hammer back to us in days and even walked us through what caused the failure. Will definitely be calling them again.”
M.K.
Site Foreman
“Needed a seal that the OEM had on indefinite backorder. One call to these guys and they had it sourced and shipped next-day. That kind of hustle is rare.”
D.C.
Fleet Manager
“Purchased a certified rebuilt breaker and it's been running strong. Communication was solid throughout the process and their after-sale support has been equally impressive.”
T.G.
Equipment Purchaser
“Friendly, knowledgeable team that clearly lives and breathes this equipment. Would recommend them to anyone in construction, demo, or quarry work.”
C.T.
Operations Director
Frequently Asked Questions
Got Questions? We've Got Answers.
Get in Touch
Ready to Get Your Equipment Back in Service?
Reach out for a free, no-obligation estimate. Our team is available around the clock.